First Name

Last Name

Email

Password

Create an account

Sign Up

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Pellentesque efficitur nisl sodales egestas lobortis.

Browse by Application

Give us a call and we'll assist in finding the most suitable, cost-effective fabricating equipment for your needs.


Specializing Exclusively in Structural Steel and Sheet Metal Fabricating Equipment

The Piranha Model PII-88 ironworker has dual-operator controls for the punch station and shear/coper stations and an Automatic Urethane Hold Down on the Plate and Angle Shear. Both ends of the machine can be operated independently of each other at the same time. A large, open punch station allows the use of a virtually unlimited range of standard attachments and special tooling, in addition to a 24″ plate shear capacity. See more Piranha ironworker machines.

Summary

Video

Mechanical Stripper Attachment- keeps material flat through the punching process, eliminating

distortion. The shorter required stroke gives you a faster punching cycle.

Automatic Urethane Hold-downs- clamps and releases material automatically with each stroke. Part movement is eliminated by clamping the part throughout the entire shearing cycle.

Visibility- a direct line of sight over the hold down bar allows the operator to easily and accurately line up cuts to the shear blades.

Flat Bar Shear- the low rake angle shear design results in flatter and higher quality sheared parts. Shear blades have four usable edges giving you a longer life and less expensive blades.

Angle Shear- the floating upper blade seats in the center of the angle prior to cutting minimizing

Coper Notcher- the low rake angle keeps part flat and under control during notching

Features

Specifications

5 Punch & Die Sets 9/16” through 1-1/16”

Standard Equipment

The bending attachments are designed to increase productivity on the punch end of the machine. Bending attachments come in 18″,24″,36″ versions and a 24″ Press Brake tool holder that are mounted parallel to the beam allowing you unlimited throat depth. All bending attachments include 4-way bending dies with openings of 7/8”, 1-1/8”, 1-1/2” and 2”.

On the punch end of the machine we offer an adjustable Channel Shear capable of shearing 2”-8” standard channel. We also offer a Channel Die Block which replaces the standard die block and is designed to punch a hole in the leg or web of channel.

Channel Shear Kits are size specific channel shear blades and a hold down block that replace the standard angle knives and angle block and allows you to shear channel without slug loss in the angle section of the machine.

Oversize Attachments mount in place of standard punch attachment and are designed to punch a 50-ton maximum hole. Heavy Duty attachments and urethane stripping options for attachments 2-3/4” and larger are available upon request.

The quickset gauging table option is a productivity tool for the punch end. The gauging table mounts around the die block and uses finger stops to repeat a series of punched holes in flat bar or angle. The attachment comes with a table and flat bar gauge with measuring rules for easy hole location layout. A 5’ or 10’ extension can be added to the left or right side of the base table for longer part processing.

The backgauge option is a productivity tool for the shearing section. The backgauge mounts on the drop side of the machine and uses a compression sleeve for infinite, easy adjustment to gauge cut lengths in the angle, flat bar and round bar shearing stations. Electronic versions of this backgauge are available which automatically cycles the machine every time material makes contact with the backgauge probe. A support leg is included with the 9’ and 12’ versions.

The roller feed tables come in 5’ lengths and can be bolted together to make longer sections for fast, easy feeding of plate or angle. Includes 20” wide rollers for flat bar and 6” rollers in the angle section. Adjustable to accommodate floor height and machine type.

The pipe notching attachments mount easily on the platen table in place of the punch die block. This is a single notch system. To notch both sides of the pipe you must rotate the pipe and realign with the notching die for the second notch.

The pipe notching attachment is made up of three separate pieces, the pipe notching die holder, the pipe notching die and the pipe notching striker.

The pipe notching die holder is a universal die holder that bolts to the platen table and can accept 3/4” through 2” Schedule 40 Pipe Notching Dies

The pipe notching dies are spring return die sets that mount in the pipe notching die holder. Standard sizes of pipe notching dies are 3/4”, 1”, 1-1/4”, 1-1/2” and 2” Schedule 40. Other sizes of pipe and tube notching dies are available upon request but may require a different die holder.

The pipe notching striker is an extended flat bottom punch used in your standard stripper assembly to press down the pipe notching die.

Browse by Application

PIRANHA PII-88 IRONWORKER

PIRANHA PII-88 IRONWORKER

Contact us for more information:

Specializing Exclusively in Structural Steel and Sheet Metal Fabricating Equipment